Garment Alteration: Shortening a Shirt Sleeve

I like to alter ready to wear clothing. I mean, really.

This chambray shirt belongs to my son-in-law Brian (he’s a photographer); it fits him well, except the sleeves were very, very long. In this post, you’ll see how I took the path of least resistance to get to the desired end.

shirt before
Sleeves too long…

We examined the shirt and determined that the sleeves needed to be at least 2 inches shorter. Not a problem, right? Here’s my assessment and determination of the path to a better fit.

Option 1: Remove the cuffs, cut away 2 inches from the remaining sleeve length, and re-attach the cuffs. But wait, the cuffs and placket closed with studs rather than buttons and buttonholes, which complicated things.

cuff

Option 2:  Cut the cuff/sleeve seam and just move it up, knowing that the long placket would become shorter. Nope, can’t do that either. On the placket, exactly two inches above the cuff there’s another stud. Altogether, I must forget about removing the cuff.

Option 3: Let’s look at the armscye (the armhole/sleeve seam).  Nope. The seams are flat-felled with three rows of topstitching in a chain stitch.  It would be quite complicated to cut away 2 inches from the sleeve cap all around without destroying the armhole shape.   More conundrums.

Option 4: Eureka moment to the rescue. Plus, this idea could be a design element and reduce the sleeve length – all at the same time.  I planned two  ½ inch tucks mid-sleeve from the right side of fabric, and sew them down with topstitching so they somewhat match the flat felled shirt seams.  No ripping and undoing involved – not even the sleeve seam in the elbow, although I did think about opening it up to keep the project flat. As it turns out, I did not have to. So here’s the process:

  • I determined the center of the sleeve length by folding it over. We’ll call it the “elbow line”, and it should be as accurately on the crosswise grain as possible. In the pictures, I started working from the wrong side, but it may be better to work from the right side as long as you use removable marking tools.

sleeve mark

  • Mark the elbow line with pins and fabric markers all the way around. See photo above.
  • Mark a line 1.5 inches above the elbow line, also all the way around.
  • Mark still another line 1 inch below the elbow line. Note that the two lines above and below the elbow are not equidistant to the elbow line. There’s a method to the madness, y’all. (The final tucks will end up ½ inch equidistant from the elbow line.)
tuck process
Lower sleeve is pushed inside the upper part.
  • To make the tucks, push in the lower sleeve inside along the upper line, press, and sew a ½ inch seam away from the fold to make a tuck. Your needle thread should match the thread used in the rest of the shirt. In this case, I used a slightly heavier white thread (Sulky 12 wt. cotton) and a topstitch needle (to accommodate the thicker thread). Press down the seam, and topstitch the other end of the tuck all around.  For this, I removed the flat bed from my machine, so the sleeve could be sewn in the round easily.
machine bed2
First stitching line for making the tuck – done “in the round”.
machine bed3
Sewing down the tucks to emulate flat-felled seams
  • Repeat the tucking process for the line below the elbow. Then, repeat the whole thing on the other sleeve.
tucked3
Extreme close-up of sleeve
tucked2
The stitched down tucks match the factory seams pretty closely.
shirt done3
Looks good. A new design element, mid-sleeve.

You. Are. Done.  The sleeve-alteration accomplished the end goal and made it look like a design element. It worked on this casual western style shirt, but will the tucking work on a dress shirt?  It may; you’ll just have to think it through with your own particular shirt.  Hey, people, you can have fun with alterations. Seriously.

Wishing you a great December and Holiday Season!

Samina

 

 

 

Advertisements

8 thoughts on “Garment Alteration: Shortening a Shirt Sleeve

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s