Fear of Fabric: Sheer, Slippery, Bumpy Cut Velvet

All the above elements can, and do, exist in cut velvet on a sheer silk chiffon base.

featured image
Difficult fabric and matching thread. I just like the image……

In the past, I’ve gifted a couple of friends with lengths of similar lightweight cut velvet. I want to extend my apologies to them. Also, years ago I outsourced my daughter #2’s prom dress to my friend Peggy who is the best custom dressmaker ever; along with the pattern, I delivered a sheer cut velvet for the dress. Peggy, where are you? I want to apologize in person. By the way, you did a spectacular job!!

Recently, I got to work with this spoiled b—- of a fabric. But it redeems itself in the end – whatever you make with cut velvet, it will be beautiful. Because the fabric is the star.   You just need to be mindful of a few things.

Pattern: Yes, again…..

Choosing a pattern with an easy fit and minimum seams is essential.  Plus, I look for linear rather than curved seams.

pattern
Yep. Pulled this one out again

I chose the oft-repeated Simplicity 4528 View B, which is loose enough and has linear enough seams to make it suitable for this light weight cut velvet. However, I don’t look forward to dealing with the collar and neckline. Maybe I’ll change the neckline treatment to a plain bias facing. We’ll see… I live in the South and the Scarlett O’Hara optimism syndrome is rampant around here.

Cutting:

cut on paper
Cutting with newspaper underneath
layout
Bumpy fabric . Use lots of pins, weights and whatever you can find to lay the pattern down

a) Be mindful that the nap runs down!   b) Use paper underneath for all sheer, slippery fabric, as recommended by professionals — and I used tons of pins and weights, together. If the cut pile was on a thicker fabric, like satin, I would still use paper underneath.   c) I cut it out folded, with wrong sides together. It doesn’t matter, since either way, the uneven piled surface will affect the handling. You just cannot put a paper pattern nice and flat on the fabric, even on the flat wrong side.  d) I found that smaller snips of the scissors made the cutting a tad smoother.  I want to reveal here that I prefer scissors to a rotary cutter. So there we have it.

Sewing:

double basting
Double basting? It worked….

As in all velvet, extensive hand basting is highly recommended. With this particular piece, I did what’s called “double basting” to avoid bottom layer creep — in the length as well as in the seam allowance. I pulled up this information in Claire Shaffer’s, Fabric Sewing Guide. It suggests double basting but I did not see a description of it.  Pictured above is what I understand double basting to be. Is it two basting lines, running parallel? Or is it a second basting stitch running on top of the first one?  Well, it somewhat worked.  Also, I used a walking foot to sew the seams. Claire recommends holding the fabric taut on both sides of the needle/presser foot.

Seam finishing:

seams
Left seam: steam pressed.   Right seam: unpressed

Once sewn, I chose to leave the seams well enough alone. The edges are not shedding, and not raveling. Serge-finishing or adding any kind of thread will add just that – more thread. I steam pressed the seams open.

Pressing:

Steam only! No touching, please.  Hold the iron on top of area to be “pressed” and tap on it by hand.  Er, remove iron first……

The hemming process and the neckline will have to be thought through, and I’m not there yet. Like my hero Scarlett, I’ll think about those tomorrow…..

see through

After all is said and done, I adore this fabric for its looks! It is thin enough to wear through the extended Texas summers but the color gradient is so autumnal.

Have you sewn with this kind of fabric? If you have, add some tips in the comment section — pretty please.

Samina

 

 

 

Advertisements

6 thoughts on “Fear of Fabric: Sheer, Slippery, Bumpy Cut Velvet

  1. Mmm turning bright green with envy here, it looks beautiful. I haven’t used a cut velvet, but have used silk velvet a few times. Most of what you say about handling strikes a cord. I tend to cut a double pattern and cut out in one layer. My electric shears need new blades, but when they’re right they are the bees knees for floaty, slippery fabric. Probably beacause they make many small cuts. Try to get a decent swipe with the shears and the fabric pushes off the line. I hand overcast my seams to finish, labour intensive but ‘light’, and also hand hemmed. Thats not as hard as, for example, hand hemming satin, because the thread you pick up on the right side can be buried in the pile. I used slip stitch and avoided pulling it tight.

    Like

    1. Ooooh. Didn’t think of cutting in one layer. I’ll remember that for next time I sew with this fabric – if ever. Thank you for that , and all the other tips. I am also hand hemming and hand overcasting where needed.

      Like

  2. A special place in hell for that stuff. There’s often a fiber in the substraight that is pokey and sharp as a cut seam.
    I made a shirt of it and I tossed it, after I scavenged pieces for a slouchy cap (lined and interlined with flannel, thank you). And I gave that hat away.
    It’s so pretty, though. It really is. I hope your results are better than mine.

    Liked by 1 person

  3. I think it’s turning out good. Only thing left to do is the hem and sleeve hem. I wonder what other wonders there are in fabric hell. Lol.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s